Practical Ways Knowing Damage Foot Car

Travel far after Lebaran certainly excruciating four-wheeled vehicles you. Not infrequently, the various components of decreased performance, one of the legs.

Before the check to the workshop, you should make your own inquiries. There is an easy way to determine the damage to the component legs. Devices that you need is a jack and both hands.

- Examination of the tie rod

After the wheel lifted, try to hold the left and right tires. Then shake by pressing and dragging it. If a sound like iron collided or feels loose, there is a chance your tie rod problematic.

- Examination of ball joint

Just as the tie rod, the checks carried out by shaking the tires. Only this time the position of the hands are at the top and bottom of the tire. If feels loose, chances are it's time your ball joint is replaced.

- Examination bearing

To check the wheel bearings, tires you simply rotate clockwise. Do it while holding the spring, when the feel the vibration or sound of creaking, there is the possibility of bearing is worn or dry.

- Examination of the rubber bushing arm

Over time the rubber bushing arm can become brittle or inflexible. To check this, try lowering the car from the jack, and then press to simulate as if cars were passing through potholes. If the sound of creaking, rubber certainly need to be replaced.

- Examination Shockbreaker

The easiest thing is to see whether there is oil seepage on shockbreaker. If there is, you need to change or make improvements at shockbreaker. Another way is to press cars, damaged shockbreaker will cause the car to sway up and down excessively.

Source : http://otosia.com